Via a simple i.LINK connection, the HVR-DR60 Hard Disk Recording Unit developed by Sony allows recording of HDV1080i stream from an HDV camcorder, or DV stream from a DVCAM camcorder. The 1.8-inch internal HDD offers a large capacity of 60GB, which translates into an impressive approx.270 minutes (4.5 hours) for both HDV and DVCAM recordings.
The HDV1080i stream is recorded as native HDV files (.M2T), while DV stream is recorded as AVI files (.AVI :DV Type1).
When connected to a PC, the HVR-DR60 is recognized as a standard external drive, so you can immediately access and edit the recorded footage just as any typical video file. This saves the time previously required for digitizing material from the tape to PC - time that could otherwise be spent for more creative and productive editing tasks.
A leading manufacturer of nonlinear editing software has announced its intentions to support the HVR-DR60. Additionally, via the i.LINK connector, the HVR-DR60 can be controlled and output an HDV or DV stream in the same manner as a VTR.
Hybrid operation for reliable recording & archiving
Using the hybrid recording function, in which video and audio material is recorded simultaneously to the hard disk and tape, you can be assured that you won't lose an important shot. In the rare case that either the tape device or hard disk fails, you will always have a backup.
The hybrid function also facilitates archiving operations of your all-important source footage - which in most cases do not allow for reshoots. After a shoot, immediately archive your source tape and use the HVR-DR60 material as your work footage. Unlike camcorders using low-capacity recording media, there is no need to invest the time and effort in copying the original data to a separate high-capacity medium. Just reformat the HVR-DR60 and you are ready to go on your next assignment.
Uses the same batteries that power your camcorder
With the HVR-DR60 you can use the same infoLITHIUM L Series batteries that are used for the HVR-V1U, HVR-Z1U and DSR-PD170 camcorders. Using the smallest capacity NP-F570 battery, the HVR-DR60 operating time is approx.270 minutes (4.5 hours), and with a high-capacity NP-F970 unit, this increases to approx.810 minutes (13.5 hours). Long operating hours are possible with the batteries that Sony HDV users already have at hand.
Small size and perfect balance
The HVR-DR60 measures just 79(W)x44(H)x100(L)mm in size, and only 227g in weight (excluding battery). Using the supplied shoe adapter, the unit can be mounted on the cold shoe of the camcorder. Also, by use of the optional blacket VCT-1BP, it can be mounted on the rear of the camcorder, where it will not affect the mobility of the compact camcorder.
Ideal companion for the HVR-V1U
The HVR-DR60 can be used with existing HDV/DVCAM camcorders equipped with an i.LINK interface such as the HVR-Z1U, HVR-A1U and DSR-PD170. However, use with the HVR-V1U offers unique features only available in this combination.
Tapeless Recording with the HVR-V1U
The HVR-DR60 can synchronize with the record command that is outputted from the camcorder. The HVR-V1U differs from its predecessor in that it can send a record signal with out the presence of a tape inserted. Thus tape-less, "Hybrid Recording" is possible by connecting the HVR-V1U with the DVR-DR60.
