The Platinum DSLR Cleaner will clean any sensor filter no matter its coating or internal dust removal system (IDRS) filter housing. Its platinum cured cleaning silicone can also be cleaned with specially made cleaning strips to extend its cleaning life span.
- Safely cleans uncoated sensor filters
- Safely cleans ITO and Dichroic sensor filters
- Safely cleans Internal Dust Removal System sensor filters
One of the biggest features with the Platinum cleaner is its
ability to have it's cleaning silicone repeatedly cleaned free of
accumulated dust and fibers. The Platinum cleaner comes with 6
silicone cleaning applications and with the purchase of additional
cleaning strips the life span of the Platinum could be extended
indefinitely. The cleaning adhesive used to clean the Platinum
silicone has been developed and tested not to transfer any of the
adhesive to the silicone.
The Platinum DSLR Cleaner is made from a specially manufactured
platinum cured silicone that does not use any molds or mold release
agents in its creation. This eliminates the chance of mold release
agents permanently bonding and contaminating the silicone when it's
molded.
The silicone used has a patent pending micro texture on the
cleaning surface which helps to stop the formation of a vacuum seal
when it's applied to a cleaning surface. When the silicone is
depressed on a surface the micro texture flattens out and adheres to
any dust or fibers. Then, when the pressure is released the micro
texture flexes back into place and allows air in, breaking the vacuum
seal. This helps to reduce the adhesion strength and impact of the
cleaning.
Note - Dust-Aid has eliminated every possible contamination to the cleaning silicone and have designed the cleaning silicone not to transfer its internal oils to a surface when applied in a straight up and down manner. However, if the cleaning silicone is accidently dragged or twisted and leaves residue, it can easily be removed with the Dust-Wand kit.
