Image pickup device
- 1/3" interline-transfer CCDs
Color separation optical system
- F1.4, 3-color separation prism
Number of pixels
- Total: Approx. 1,110,000 pixels
Color bars
- HD:SMPTE HDTV color bars
- NTSC: SMPTE type color bars
Sync system
- Internal sync (built-in SSG)
- External sync:BB, VBS, signal or HD tri-sync signal
Lens mount
ND filter
Gain
- 0, 3, 6, 9, 12, 15, 18 dB, ALC
Electronic shutter
- Standard value: 59.94 Hz
- Fixed values: 7.5-10,000 Hz, 11 steps (HDV HD60P/HDV HD30p;DV 60i mode: 6.25-10,000 Hz 11 steps (HDV HD50p/HDV HD25p: 6-10,000Hz, 12 steps (HDV HD24p/DV 24p)
- Variable scan: about 60 to 10,000Hz (HDV HD60p/HDV HD30p; DV60i/ about 50 to 10,000 Hz (HDV HD50p/HDV HD25p), about 24-10,000Hz (HDV 24p;DV24p)
Recording format
- 720/24p, 720/25p, 720/30p, 720/50p, 720/60p, 480/24p, 480/60i
HDV Video
- Video signal recording format: HD1 format, 8-bit, 19.7 Mbps
- Compression: MPEG-2 video (profile & level: MP@H-14)
- Video Format: 720/60p: 74.25/1.001 MHz (4:2:0 component), 720/50p: 74.25 MHz (4:2:0 component), 1080/60i: 74.25/1.001 MHz (4:2:0 component, up conversion only), 1080/50i: 74.25 MHz (4:2:0 component, up conversion only)
DV Video
- Video signal recording format: DV format, 8-bit, 25 Mbps
- Compression: DV compression, 4:1:1 (NTSC)
Audio
- HDV Audio signal recording format: MPEG1 Audio Layer II
- DV Audio signal recording format: 16-bit (locked audio), 48 kHz PCM for 2 channels or 12-bit, 32 kHz PCM for 4 channels
Tape
- Type: Mini DV tape
- Tape speed: 18.812 mm/sec. (NTSC)
- Record/play time: 63 minutes (with an M-DV63PROHD tape)
Connectors
- HD/SD SDI output: 0.8 V (p-p), 75 ohms, unbalanced (BNC) HD-SDI: SMPTE292M/299M standard(embedded audio) SD-SDI: SMPTE259M/272M standard(embedded audio)
- Analog composite output: 1.0 V (p-p), 75 ohms, unbalanced (RCA)
- Analog component output: Y: 1.0 V (p-p), 75 ohms, unbalanced (BNC)
- Analog composite input: 1.0 V (p-p), 75 ohms, unbalanced (BNC: switchable from Genlock input)
- Genlock input: 1.0 V (p-p), 75 ohms, unbalanced (BNC)
- Audio inputs: Mic: -60 dBs, 3 kohms, balanced (XLR), +48 V output for phantom power supply Line: +4 dBs, 10 kohms, balanced (XLR)
- Audio outputs: -8 dBs, low impedance, unbalanced (RCA)
- Earphone jack: -18 dBs to -60 dBs, 8-ohm impedance (stereo mini-jack x2)
- Time code input: 1.0V-4.0V, high impedance, unbalanced (BNC: switchable from component output)
- Time code output: 1.0V-4.0V, low impedance, unbalanced (BNC: switchable from component output)
- IEEE1394 connector: 6-pin
- Remote connector: DIN 6-pin
