Fujifilm IS Pro Forensic Filter System Kit

$3,799.95

QTY

Accessories

• UV / IR / Visible Light Sensitive Modified Interchangeable-lens SLR-type digital camera

• 12.34 million (S-pixel: 6.17million, R- pixel: 6.17million) pixels
• *The number of pixels on the image sensor which receive input light through the optical lens, and which are effectively reflected in the final output data of the still image.

• 23.0mmx 15.5mm Super CCD SR Pro (~ 380nm - 1000nm Sensitivity)

• L: 4,256x2,848 / M:3,024x2,016 / S:2,304x1,536 pixels

• Compact Flash (CF) Card (Type I/II) and Microdrive

• Exif-JPEG (Exif2.21* compatible)´ FINE / NORMAL [Design rule for Camera File System 2.0 compliant / DPOF- compatible]/ CCD-RAW(14bit) / CCD-RAW + Exif- JPEG
• In camera TIFF processing will become available as an optional free downloadable firmware update ( RAW is disabled in TIFF Mode )
• No Movie Function
• *Exif 2.2 is a newly revised digital camera file format that contains a variety of shooting information for optimal printing.

• Nikon F mount (with AF coupling and AF contacts)

• Type DX AF Nikkor: All functions supported
• Type G or D AF Nikkor (IX Nikkor lenses can not be used): All functions supported
• Micro Nikkor 85 mm f/2.8D:All functions supported except auto-focus and some exposure modes
• Other AF Nikkor(excluding lenses for F3AF): All functions supported except 3D color matrix metering II and 3D multi-sensor balanced fill-flash for digital SLR
• AI-P Nikkor: All functions supported except 3D color matrix metering II,3D multi-sensor balanced fill-flash for digital SLR, and auto-focus
• Non-CPU: Can be used in exposure modes A and M; electronic range finder can be used if maximum aperture is f/5.6 or faster; color matrix metering, multi-sensor balanced fill-flash for digital SLR, and aperture value display supported if user provides lens data

• Approx. 1.5x focal length in 35mm format equivalent

• AUTO, ISO100/125/160/200/250/320/400/500/640/800/1000/1250/1600/2000/2500 /3200 (Standard Output Sensitivity) It’s recommended to stay above ISO 200 when photographing in IR or UV wavelenths

• TTL phase detection. AF assist illuminator. (Proper AF function require a UVIR cut filter on the lenes. AF focusing my not be possible with some IR or UV filters covering the lens

• Normal: 11 areas; single area or group can be selected
• Wide: focus area can be selected from 7 areas

• 1) Single Area AF 2) Dynamic AF 3) Group Dynamic AF 4) Dynamic AF with closest subject priority

• 30 sec. to 1/8000 sec. Bulb.

• C H: Up to max. 3 frames/sec. ([D-RANGE] set to [100%(STD)]) / Up to 1.5 frames/sec. ([D-RANGE] set to WIDE (other than [100%(STD)]))
• C L: Up to max. 2 frames/sec. ([D- RANGE] set to [100%(STD)])/ Up to 1.5 frames/sec. ([D-RANGE] set to WIDE (other than [100%(STD)])), and 1 frames/sec.

• Number of shots 2-9 compensated EV value 1/3 1/2 2/3 1 EV step.

• Three-mode through-the-lens (TTL) exposure metering. 3D Color Matrix Metering II (metering performed by 1,005-segment RGB sensor) / Centerweighted / Spot (UV / IR Auto exposure may not be accurate due to the high presence of IR light beyond the meters sensitivity)

• Programmed Auto with flexible program [P], Shutter-Priority Auto [S], Aperture- Priority Auto [A], and Manual [M]

• Automatic / Incandescent light / Fluorescent lamp (1-5) / Fine / Flash / Shade / Color temperature / Preset Custom(1-5) Fine tuning can be set. (Hue veries depending on the cutoff point of the UVIR cut filter used - proper white balance may not be possible without a UVIR cut filter on the lens)

• (STANDARD) / F1 / F1a / F1b / F1c / F2 (color is dependent on the cutoff point of the UVIR cut filter used)

• AUTO / 100%(STD) / 130% / 170% / 230%(W1) / 300% / 400%(W2) (In some scenes, depending on the light wavelengths being photographed, the DR settings may not contribute significantly to image quality)

• Fixed-eyelevel pentaprism, built-in diopter adjustment, Frame coverage: Approx. 95%, Magnification: Approx. x 0.94

• 2.5-inch approx. 230,000 pixels low temperature polysilicon TFT color LCD (approx. 100% frame coverage for playback)

• 30 second live image CCD preview to the cameras LCD monitor or external NTSC/PAL compatible monitor directly from the imaging sensor in color or black and white
• Live image preview can be digitally magnified and brightness adjusted to improve focusing accuracy or to compensate for light intensity. The video image can also be viewed on an NTSC / PAL monitor or on the PC over the cameras USB 2.0 connection directly form Fujifilm’s optional HyperUtility HS-V3 software.
• Color or B&W mode can be selected by holding down the Face Detection button on the back of the camera. Instant Live Image Preview B&W mode can be activated by holding down the Preview/Back button on the back of the camera

• NTSC / PAL selectable

• USB 2.0 (High-Speed)

• The Zeiss Makro-Planar T 2/50 ZF non-CPU with IR focus adjust markings, and Tamron Macro SP AF90mm F/2.8 Di Macro Lens 1:1 are considered excellent IR investigative lenses, however Fujifilm recommends using quartz based lens systems for UV photography. In all cases manual focusing may be necessary to achieve an acceptable focus
• Some lens and filter combinations can cause undesired hot spot “halo” effects. This is often caused by reflections in internal lens elements requiring larger lens hoods or changing position vs. the subject