The EL-Skyport RX Trigger Set allows you to wirelessly control your Elinchrom RX flash units from the included transmitter. The set includes one Transmitter, and two Transceiver RX's.
The EL Skyport Transmitter allows you to fire your strobes wirelessly up to 164' in the studio and 394' outside. When used with Elinchrom RX heads or packs, the transmitter can wirelessly adjust the flash power in 1/10 stop increments and turn on and off the modeling lights. The transmitter has four selectable workgroups and eight frequency channels to give you further control in firing separate groups of lights and adjusting groups of lights.
The Skyport Transceiver RX module fits only Elinchrom RX units using the integrated multiple interface for triggering and for the computer remote operating option. No internal battery is required, just plug into a Style RX, Ranger RX or Digital RX flash unit (Please remember to double check the “Group” and “Channel Frequency” settings) and the Transceiver RX is ready to use. To control the flash power, modeling lamp and flash synchronization, only the Transmitter (sold separately) is required. To control all RX functions, the latest EL-Skyport software and USB Transceiver RX (both sold separately) is required.
NOTE! To connect the Skyport Transceiver RX module to the Charge/Remote socket of the Ranger RX battery pack, the Remote Adapter 19374 or Remote Adapter Cable 11110 is required.
Features
- Sync speed of up to 1/1000 s
- Approx. 164' operating range in the studio / 394' outside
- Triggers from hotshoe or sync socket
- Interference free operation with 40 bit security
- 8 frequency channels / 4 workgroups
- “All” switch controls all units in workgroup 1-4
- Transmitter's Long-Life lithium battery for up to 50,000 flashes
- Moveable antennas optimize reception and working distance
- Test button for manual flash trigger
- +/- Buttons to change flash power settings of RX units and to switch modelling lamp
Includes
- Transmitter, battery and spare battery drawer
- Two Transceiver RX
- Sync cable 20 cm, 2.5mm Jack / Camera X-socket
- Note: Ranger RX requires the Remote adapter cable or Remote adapter.
