 |  |  |  |  |  |  |  |  |  |  |
 |
|
 |
The EL-Skyport Computer Remote / Trigger Set allows you to wirelessly control your Elinchrom RX flash units from your computer. The set includes one Transmitter, two Transceiver RX, one USB Transceiver RX and EL-Skyport Software 2.0.
The EL Skyport Transmitter allows you to fire your strobes wirelessly up to 164' in the studio and 394' outside. When used with Elinchrom RX heads or packs, the transmitter can wirelessly adjust the flash power in 1/10 stop increments and turn on and off the modeling lights. The transmitter has four selectable workgroups and eight frequency channels to give you further control in firing separate groups of lights and adjusting groups of lights.
The Skyport Transceiver RX module fits only Elinchrom RX units using the integrated multiple interface for triggering and for the computer remote operating option. No internal battery is required, just plug into a Style RX, Ranger RX or Digital RX flash unit (Please remember to double check the “Group” and “Channel Frequency” settings) and the Transceiver RX is ready to use. To control the flash power, modeling lamp and flash synchronization, only the Transmitter (sold separately) is required. To control all RX functions, the latest EL-Skyport software and USB Transceiver RX (both sold separately) is required.
The USB Transceiver RX module allows you to control your Elinchrom RX flash units by computer. Controllable features include delay flash, flash stand-by, modeling lamp features, flash power, and more. The transceiver fits any Mac or Windows computer with a USB connection.
Note: Full remote control is only available by using a full RX Transceiver system with Elinchrom RX flash units.
