Elinchrom Ranger 1100w/s Battery Outfit

Features:

• Resistant to Humidity - Special flashhead connectors, security seals and caps, "Dry-foot" construction for wet outdoor-conditions.
• Power Stored - efficient 1100 w/s
• Charging - Fast - 6 seconds to full power for approx. 100 flashes. Slow - 11 seconds to full power approx. 140 flashes.
• Charger - Multi-voltage with set of three adapters.
• Re-Charging Time - To full power - 3 hours. The charger can charge a battery in the unit or externally. N.B. New batteries require several cycles to reach full efficiency.
• Charge Ready Beep - Switchable On/Off, with green LED indicator.
• Charge Ready Light/Open Flash - Indicated by two bright LEDs!
• Battery Charge Indicator - Two green LEDs 100%, one green LED 50%, and one red LED approx. 10%. The Free Style electronic monitors the low level charge to maximise battery life.
• Modelling Lamp - Press the touch once, modelling lamp will switch off automatically after 15 seconds to conserve power. Press twice (within 2 seconds), the modelling lamp will switch off only after 30 seconds. Maximum modelling lamp power is 100 W (one flashhead), 50 W (using two). N.B. 100 W modelling lamp power for 12 seconds equals one full power flash!
• Photo Cell - is adapted to release in bright ambient light.
• Auto Off - To save battery power and maximize flashes, the Ranger will always switch off 5 minutes after the last operation.
• Memory - Retains all last settings even at automatic switch off!
• Power Adjustment with ADF - 5 f-stop power range (68 w/s - 1100 w/s) in 1/10 steps with "Auto-Dump-Function".
• Synchro Socket - A traditional synch socket, used in all Elinchrom/Prolinca units.
• Battery-Box Quick Release - Press the pads on the left and right sides of the housing. Lift the unit to release the battery. Place the unit over the replacement battery and press down firmly.
• Power Display - Logarithmic, compatible with all other Elinchrom power displays.