Anton Bauer Dionic 90 Battery and Charger Kit

Battery details:
For videographers with weight as the highest priority, the Dionic is the choice. The Dionic 90 weights only 1.7 lbs. and is the highest capacity lithium ion battery which can be legally transported without restriction under the IATA and DOT safety regulations. It will handle a maximum load of 90w, is rated for 90w hours. Nominal runtimes range from six hours at 15w to 1.75 hours at 50w.

Can be used with PowerCharger and Titan series chargers only.

Charger details:
The T2 combines two channel independent simultaneous InterActive charging with a 70 watt DC output for camera operation. The T2 is capable of simultaneously operating the most power-hungry camera while charging up a spare battery in the fastest charge time possible. InterActive charge programming provides all charge termination and protection routines for safe, reliable, chemistry independent charging.

T2 automatically identifies battery type and chemistry adjusting the charge process for each battery. T2 will address all Anton/Bauer Gold Mount batteries including HyTRON and Dionic. T2's simultaneous charging reduces the time to obtain two fully charged batteries versus sequential charging (see chart on page 8), charging two batteries in the time it takes a sequencing charger to address one battery. T2 meets all applicable standards including CE and FCC requirements.

Cable details:
Camera Power XLR-4 Accessory Cable 10'/ 3.04m cable connects to any PowerCharger or T2 model to power camera / camcorder through standard camera 4-pin XLR input. Heavy duty wire gauge cable and high quality connectors minimize losses.

• 2 - Dionic 90 Lithium-Ion Batteries
• T2 Multi-Charger/Power Supply
• XLR-4 Power Cable