The rugged TASCAM DR-100mkII offers high-end audio recording features to filmmakers, musicians and audio engineers who demand more from their portable recorder. It features four built-in microphones, two cardioid and two omnidirectional, for great sounding recordings. A pair of XLR microphone inputs with phantom power welcomes pro-grade condenser microphones, and line in and out connectors are also provided. The markII version adds balanced line ins, S/PDIF digital inputs, locking connectors and more.

Main Features

• +4dBu (maximum +24dBu) line input available via XLR jack
• XLR jack with a locking latch for professional use
• Better quality uni-directional and omni-directional microphones than the original DR-100
• Accepts digital input signal from an external digital device via remote jack
• Improved Mic pre amp with higher gain and lower noise
• Up to 96kHz/24-bit WAV recording
• 32 to 320kbps MP3 recording
• XLR or RCA 1/8" line input
• S/PDIF digital power
• Wired/wireless remote control included (RC-10)
• Limiter and low cut filter
• Back panel dedicated switches
• Rugged aluminum casing
• VSA changes playback speed from -50% to +16%
• Records to SD or SD-HC card (2GB card included)
• Mini USB 2.0 jack and cable
• Large thumbwheel individual gain control
• Built-in speaker
• Tripod Mount
• Included Li-ion battery, windscreen and carrying case

Recording Media: SD card(64MB~2GB), SDHC card(4GB~32GB)

File System: FAT16/32

File Format: WAV,MP3

Recording/Playback Format
WAV: 44.1/48/96 (HS mode) kHz, 16/24-bit
MP3: 44.1/48kHz, 32/64/96/192/256/320kbps

Number of Channels: 2 channels(stereo)

Playback Speed Control (VSA): -50% - +16%(1% step)

Analog Input
MIC/LINE 1 IN (XLR) (Phantom Power Compatible): XLR-3-31 (1:GND, 2:HOT, 3:COLD)
MIC (Switch is set to MIC)
Input Impendance: 2.1kohm
Nominal Input Level: -14dBu
Maximum Input Level: +2dBu
LINE 1 (Switch is set to LINE )
Input Impendance: 2.5kohm
Nominal Input Level: +4dBu
Maximum Input Level: +24dBu

LINE 2 IN
Connetor: 1/8"(3.5mm)stereo mini jack
Input Impedance: 22 kohm or more
Nominal Input Level: -10dBV
Maximum Input Level: +6dBV

LINE OUT (XLR LINE IN)
Connector: 1/8"(3.5mm)stereo mini jack
Output Impendance: 200 kohm
Nominal Output Level: -14dBV
Maximum Output Level: +6dBV

Headphone Output: 1/8"(3.5mm)stereo mini jack

Headphone Connector: 25mW+25mW(With 32ohm headphone connection)

Maximum Output: 25mW+25mW(With 32ohm headphone connection)

Built-in Speaker: 0.4W (mono)

Digital Input: 3/32” (2.5 mm) TRS jack (using the conversion cable made for this unit)
Format: IEC60958-3(S/PDIF)

USB: Mini-B type
Format: USB2.0 HIGH SPEED mass storage class

REMOTE: 3/32” (2.5 mm) TRS jack

Power Supply: Lithium-ion rechargeable battery made for this unit (TASCAM BP-L2)
Two AA batteries (Alkaline or Ni-MH batteries)
AC adaptor (TASCAM PS-P520, sold separately)
External battery pack (TASCAM BP-6AA, sold separately)

Power Consumption: 4W(maximum)

Battery Life (Continuous Operation)
Lithium ion batteries (BP-L2): Built-in mics(UNI/OMNI) About 5 hours(Recording WAV, 44.1kHz, 16 bit)
Ni-MH batteries (eneloop): Built-in mics(UNI/OMNI) About 4 hours(Recording WAV, 44.1kHz, 16 bit)

Dimensions (w x h x d): 3.15 x 6.024 x 1.378 inch / 80 x 153 x 35 mm

Weight: 10.23 oz. / 290g(without batteries)

Operating Temperature range: 32–104ºF / 0-40°C

Audio Performance
Frequency response: 20-20kHz +1/-3dB(EXT IN to LINEOUT, Fs44.1kHz, JEITA), 20-22kHz +1/-3dB (EXT IN to LINEOUT, Fs48kHz, JEITA), 20-40kHz +1/-3dB (EXT IN to LINEOUT, Fs96kHz, JEITA)
Distortion: Less than 0.01%(XLR LINE 1 IN to LINE OUT, Fs44.1kHz, +24dBu input, JEITA)
S/N Ratio: 92dB or more(XLR LINE 1 IN to LINE OUT, Fs44.1kHz, +24dBu input, JEITA)

Computer Requirements
Windows - Windows XP, Vista, or 7; Pentium 300MHz or better; 128MB RAM or more; USB2.0 recommended
Macintosh - Mac OS X 10.2 or later; Power PC, iMac, G3, G4, G5 266MHz or more; 64MB or more; USB2.0 recommended