The Profoto Batpac Portable Power is a powerful battery/inverter kit that can be used with power advanced flash equipment like Profoto D1 monolights. Apart from Profoto D1, this portable power source is also used with Acute2 and ComPact flash equipment. These portable power systems can also be used with other devices such as chargers, wind machines, refrigerator boxes, and constant light sources. This power supplying equipment comes with a handy nylon transport bag.

• A single BatPac is used to run Portfoto D1 light, a Portfoto Acute2 light, and two Portfot ComPact moonlights
• For a Profoto D1 that consumes 1000Ws power, this Profoto Batpac Portable Power pack can provide up to 300 flashes
• For the 500Ws Profoto D1, this portable power source can supply power for 600 flashes
• For the 250Ws Profoto D1, this kit can deliver 1200 flashes
• The maximum output power that can be given continuously is 600W
• It is a lead acid type battery with a nominal capacity of 17Ah and maximum input current of 60A
• The kit alarms the user when the voltage reaches 10.5 V
• When the voltage drops down to 10V, the kit automatically turns off
• When the battery is empty, it may take eight hours to recharge
  

Max continuous output power : 600 W, power limited output

Battery type : Sealed lead acid battery 12V, 17Ah

Nominal battery capacity : 17 Ah

Maximum input current : 60A

Output voltage/frequency : 120 VAC ±3%, 60Hz or 230 VAC ±3%, 50 Hz depending on model

Output wave form : Pure sine wave

Total harmonic distortion : < 3%

Idle current consumption : 120 VAC: < 0.6 A, 230 VAC: < 0.8 A

Input voltage range :10.5 – 16.5 V

Low voltage alarm :10.5 V

Low voltage shutdown : 10 V

Storage temperature range : -10-50°C

Operating temperature range : 0-40°C

Dimensions (L x W x H) : 26 x 28 x 37cm incl. bag

Weight :11.5 kg, including bag

Recharging (from empty battery) : 8 hours with the Profoto Battery Charger 2A

Ground Fault Circuit Interrupter :Yes

Fuses : ATO® Fuse Fast-Acting Type (2x30A)

Battery Capacity

Profoto D1

(used in “Bat mode”, model light off)

2000Ws (2x D1 1000 or 1x D1 1000 & 2x D1 500 or 4x D1 500): max. 150 flashes

1000Ws (1x D1 1000 or 2x D1 500 or 1x D1 500 & 2x D1 250 or 4x D1 250) : max. 300 flashes

500Ws (1x D1 500 or 2x D1 250):max. 600 flashes250Ws (1x D1 250): max. 1200 flashes

125Ws: max. 2400 flashes

62,5Ws: max. 4800 flashes

31,25Ws: max. 9600 flashes

Profoto Acute2

(max. 1 generator, model light off)

2400Ws: max. 120 flashes

1200Ws: max. 250 flashes

600Ws: max. 500 flashes

300Ws: max. 1000 flashes

150Ws: max. 2000 flashes

75Ws: max. 4000 flashes

37,5Ws: max. 8000 flashes

Recycling time :

Profoto D1

D1 1000
Recycling times (120V or 230V, mains powered): 2.0-0.2s

Recycling times (120V or 230V, BatPac): 5.0-0.5s

D1 500
Recycling times (120V or 230V, mains powered): 0.95-0.2s

Recycling times (120V or 230V, BatPac): 2.4-0.35sD1 250
Recycling times (120V or 230V, mains powered) : 0.65-0.2s

Recycling times (120V or 230V, BatPac) : 1.6-0.3s

Profoto Acute2

Acute2 2400
Recycling times (120V or 230V, mains powered) : 3.0-0.2s

Recycling times (120V or 230V, BatPac) : 7.5-0.5s

Acute2 1200
Recycling times (120V or 230V, mains powered): 1.6-0.09s

Recycling times (120V or 230V, BatPac): 4.0-0.3s