The PocketWizard N90M-ACC Remote Cable allows you to remotely trigger the electronic shutter release of the cameras with a Nikon 10-pin remote terminal. It establishes connection with the motor drive socket of the camera..  The main intension of this pre-trigger cable is to maintain the camera “awake” persistently. 

• You can set the pre-trigger switch “on” or “off” to save the energy of the battery
• The camera would quickly trigger if it is set on the “on” or “awake” mode but it would in turn consume more battery power
• The PocketWizard N90M-ACC Nikon Pre-Trigger Cable is designed and created for the MULTIMAX Ver 6.xx and higher versions exclusively
• The PocketWizard N90M-ACC Motordrive Cable can be plugged inside the MULTIMAX’s six contact ACC port
• The PocketWizard N90M-ACC Remote Cable works with the Nikon D200 or D100 w/ MB-D100 but not with the D700.
  

For remotely triggering the electronic shutter release of cameras with a Nikon 10-pin Remote Terminal.

Cable length : 3' (91.5 cm)


From Nikon 10-pin Remote Terminal

To 1/8" (3.5 mm) Stereo Miniphone

For MultiMAX with ACC port.  This cable will NOT work with the Plus II.  This -ND cable contains a "no diode" circuit necessary only for the Nikon D700, but will work with other Nikon cameras as listed.  It will not work with the Nikon D200 or D100 w/ MB-D100.  Use the N90M-ACC cable for those cameras