The Photogenic Radio Power Light DR Series is considered to be one of the most advanced lighting systems, which offers improved speed, power, and control for photographers. The built-in pocket wizard brand 32 channel radio slave receiver present in the Photogenic UV Digital Power Light allows firing of the mono light from pocket wizard transmitter or transceiver attached on the hot shoe of the camera.

• Each unit of power level is displayed in the bright LED that is present at the rear
• Additional display units and IR remote controls can be used for adjustments of hard-to-reach locations like boom arms
• The Photogenic Power light 1000 W/S Digital Mono lights have a UV-corrected flashtube, which "warms" the color temperature of the light, making it perfect for portrait photography
• The Photogenic UV Digital Power Light has built-in radio slave, which fires without wires from any Pocket Wizard Plus, original Pocket Wizard, or Pocket Wizard Multi max with channels
• The built-in optical slave of the Photogenic Power Light 1000 W/S Digital Monolights is highly sensitive
• This switchable optical slave easily synchronizes with other flashes and fires instantly when it “sees” light from other flashes
• This photogenic lighting equipment has a flash power range from 32w/s to 1000 w/s
• Remote Digital Display and Infrared Receiver (PLDIR-1), Optional Remote Digital Display and Flash Adjustment (PLDRC-1), and the Wireless Studio System Controller Software enable remote operation
• The Photogenic UV Digital Power Light has an auto dump function that allows you to access lower power without having to manually dump higher powers
• This photogenic lighting equipment has a 250W adjustable quartz modeling light with independent power control
• This modeling light can be adjusted from full to 1/32 power
• The modeling light dims when the capacitors are being charged and relights when the capacitors are completely charged
• The “plug & play” flashtube is easy replaceable
• The low-noise fan cools this photogenic lighting equipment to provide a high performance even during the most demanding applications
  

Flash Power: 32 to 1000 watt-seconds
Guide Number (ISO100@10ft.): 515 w/PL7R reflector; 160 w/no reflector
Flash Duration: 1/770 second at full power; 1/345 second at 1/32 power
Recycle Time: 3 sec. at full power; 0.8 sec. at 1/32 power
Power Control: Range: Full to 1/32 power (6 f-stops); 0.1 f-stop resolution
Modeling Light Power: 250 watt Quartz, ESS 
Modeling Light Control: Range: Full to 1/32 power (6 f-stops); 0.1 f-stopresolution
Triggering: Sync jack (5 volts); Push-to-test button; Built-in photo slave
Sync Voltage5VMain Supply: 105 - 125 Vac, 60 Hz, 10 amps
Consumption: 0.2 amps idling, 15 amps charging
Voltage Stabilization: ± 0.05 f-stop
Fuse: 3AG type 15 amp, SLO-BLO
Housing: Extruded aluminum
Weight: 7 lbs.
Dimensions (housing only): 4.5" x 4.5" x 8.75"

FLASH TUBES AND MODELING LAMPS: 

Flash TubeUser replaceable. Use only Photogenic C4-15, C4-15C (color corrected),
C4-15F (frosted) or C4-15D (frosted and color-corrected)
Modeling Lamp: 250 watt quartz halogen, ESS
                             150 watt quartz halogen, ESP
                             100 watt quartz halogen, ESR