If photography is your passion, then the Phase One P 40+ Digital Camera Back will definitely be an add-on to your creativity. This Phase One 645 Camera with P40+ Digital Back will help take photography to the next level. In addition, the ground-breaking Sensor+ technology enables you to work with a faster capture rate and switch between resolution ranges with ease.

• The P40+ 31.6 Megapixel Digital Camera Back is easy to handle and provides a direct control over the features for an extraordinary capture
• The  Phase One P 40+ Digital Camera Back enables you to shoot digital film without any lens or back restrictions
• You can use Phase One digital lenses, Mamiya 645 AF/ AFD, or Hasselblad V lenses with this digital back
• The Phase One 645 Camera with P40+ Digital Back will help capture truly revolutionary pictures with fast capture rates up to 1.8 fps at different ranges
• Sensor+ technology is a unique tool of the P40+ 31.6 Megapixel Digital Camera Back that allows you to switch between 40 and 10 megapixel captures
• This unique technology is also useful for photographers as it gives an astounding ISO range from 50 to 3200 and increases the sensitivity by a factor of 4
• The advantage of the Sensor+ technology is that you can shoot full frame 645 format 60.5 AND 15 megapixels in the same format
• 40 megapixel resolution helps you to attain the highest image quality and detail level while 10 megapixel resolution gives higher sensitivity and faster workflow
• You can use Capture One 4.8 software or any of its later versions along with the Phase One 645 Camera with P40+ Digital Back
• The Dynamic range of the P40+ 31.6 Megapixel Digital Camera Back is 12.5 f-stops

Imaging technology

Sensor: CCD
Lens Factor: 1.3
Resolution: 40 megapixels
Active pixels: 7320 x 5484
CCD size effective: 44mm x 33mm
Image ratio: 4:3
Microlens on CCD: No
Dynamic range: 12.5 f

P 40+ full resolution capture mode

Resolution: 40 megapixels
Pixel size: 6 x 6 micron
Raw file compression IIQ Large: 40MB IIQ Small: 26MB
ISO: 50, 100, 200, 400, 800

Sensor+ capture mode

Resolution: 10 megapixels
Pixel size: 12 x 12 micron
Raw file compression IIQ Large: 10MB
IIQ Small: 7MB
ISO: 200, 400, 800, 1600, 3200

Output files

Color depth: 16 bit per color
Image file formats: All output formats of Capture One are possible: FTIFF-RGB, TIFF- CMYK, JPEG.
Color management: RGB, Embedded ICC profile, CMYK

Camera system

Capture time: 1.2 sec./frame depending on camera platform
Storage security: Phase One Secure Storage System technology
Battery type: 7.2 V Lithium Ion 2500mAh
Battery Lifetime: 2000 Captures
Exposure time: 1/10000 sec.
Live preview: Promised
IR filter: Mounted on CCD
Cooling system: Passive cooling
Power up time: Less than 2 sec. from OFF,sleeping architecture for instant ON
Power: 8

LCD screen

Size: 2.2"
Resolution: 230,400 pixels
Viewing angle: 160º

P 40+ mounts

Phase One/Mamiya: Phase One 645 AF ,Mamiya 645AFD series, RZ67 Pro IID, Mamiya RB67es,
Via adaptor: Mamiya RZ67 Pro IID
Hasselblad V: Hasselblad 555ELD, 533ELX, 503CW and 501CM
Hasselblad H: Hasselblad H1 and H2 / Fuji GX645
Contax: Contax 645AF

Technical cameras and wide angle

4 x 5" via Flexadaptor:  Arca Swiss, Cambo, Linhof, Toyo, Sinar, Plaubel, Horseman

Operating conditions

Temperature Humidity: 0º to 40ºC (32º to 122ºF) 15 to 80% RH (non-condensing)

Lighting

Supports all photographic lights:  Flash, tungsten, daylight, fluorescent, HMI

Computer minimum requirements

Mac: Fast Core 2 Dual or later CPU, 4 GB RAM.
Fast HDD: RAID 0 configured systems for maximum performance. Nvidia 8800 series graphics card or newer, IEEE 1394 interface
PC/Mac: Pentium III, 2 GB RAM, IEEE 1394 interface, Windows XP Service Pack 3 or Windows Vista Service Pack 1

Software

Capture One 4.8 or later