The Kenko KFM-1100 light meter is an easy-to-use, accurate, full-featured hand-held light meter for reading both ambient and flash light.
It's ergonomic design makes holding it painless while the three buttons on the side allow you to take measurements and change the f/stop, shutter speed, or ASA/ISO.
The light meter's large and easy to read LCD shows measurements in F no. format with large numbers in 1/10 stop increments and in 1/2 stop increments in the pointer scale across the top of the LCD display. It also has a back-light for easy reading in low light situations.
The KFM-1100 is sensitive enough for ambient light to be measured for a shutter speed range from 30 minutes to 1/8000 of a second. In Cine mode it can be used to read frame-rates of 8 to 128 frames/sec.
For measuring flash, the meter has modes to either trigger the flash using a sync-cord or set to non-sync cord for manual flash triggering. The aperture range that can be displayed is from f/1.0 to f/128.
Useful in mixed flash/ambient lighting situations, the "Analyze" function can determine the ratio of ambient to flash light in a scene. This feature is very handy in scenes where a flash is being used to "open up" a shadowed area left by ambient (natural) light.
The meter's "Calculation" function can be used to average measurements that have been stored in memory, very useful in reflected light measurements to capture highlight or shadow detail more accurately. The KFM-1100 has two memory "slots" to store previous measurements that can be recalled for reference or for averaging. Just press the "M" button after each reading to store it in memory. If the memory has two readings stored, it will delete the oldest reading to store the current information.
- KFM-1100 Light Meter
- Spherical Diffuser
- Neck Strap
- Case
