| PRODUCT DETAILS |
. |
PRICE |
BUY |
 |
| Mfg #: Manfrotto |
| Description: The extension arm is 7 4/5" (19. 5cm) with a 5/8" female socket and includes a double sided stud. |
|
$19.99
|
|
 |
| Mfg #: Matthews |
| Description: The Offset Arm provides ultimate control for the Round-d-Round Doorway Dolly. |
|
$49.99
|
|
 |
| Mfg #: Matthews |
| Description: The Offset arm has two snap in pins in opposite directions so that the arm can be used in both the horizontal or vertical position. |
|
$23.99
|
|
 |
| Mfg #: Glidecam |
| Description: The Sled Offset Adapter allows the curved gimbal handle to attach lower on the end of the dyna-elastic arm of the V-16 and V-20. |
|
$89.99
|
|
|
| Mfg #: Glidecam |
| Description: This allows the sled to be lower than normal when shooting in the Low Mode configuration, and it also allows the gimbal tube to be attached upside down, both which are needed for reasons of clearance. |
|
$139.99
|
|
 |
| Mfg #: Matthews |
| Description: Side Arms can be clamped anywhere on the stand riser, allowing a light to be lowered to just above the legs and slightly offset, without the need for another stand. |
|
$79.99
|
|
|
| Mfg #: Glidecam |
| Description: The Gold Offset Adapter Set is an Accessory used with the Gold Arm and Gold Low Mode Mount/Cage. |
|
$139.99
|
|
 |
| Mfg #: Glidecam |
| Description: This allows the sled to be lower than normal when shooting in the Low Mode configuration, and it also allows the gimbal tube to be attached upside down, both which are needed for reasons of clearance. |
|
$569.99
|
|
 |
| Mfg #: Manfrotto |
| Description: This tripod is the same design as the 756MF3 but with a larger leg diameter, top spider and leg locks, enabling the 755MF3 to handle a higher load capacity. |
|
$464.99
|
|
