| PRODUCT DETAILS |
. |
PRICE |
BUY |
 |
| Mfg #: Contax |
| Description: With Cambo's sliding back, you can view through your ground glass, focus on your subject and simply slide your digital back into place to capture your image. Optional adapter required. |
|
$569.99
|
|
 |
| Mfg #: Phase One |
| Description: The Phase One P 65+ is the first digital back and camera system to take advantage of the new Sensor+ design and is the world’s first full-frame capture system based on actual 645 film format. 9mm x 40. |
|
$39,990.00
|
|
|
| Mfg #: Phase One |
| Description: The Phase One P 65+ is the first digital back and camera system to take advantage of the new Sensor+ design and is the world’s first full-frame capture system based on actual 645 film format. 9mm x 40. |
|
$42,990.00
|
|
 |
| Mfg #: Cambo |
| Description: Therefore it's very useful to architectural photographers. Interface plates are available for backs with Haselblad V, H; Contax 645AF and Mamiya 645 AFD mounts. Schneider Digitar XL lenses: 24mm f5. |
|
$939.99
|
|
 |
| Mfg #: Horseman |
| Description: By using this interchangeable plate, the Horseman SW-DII can be made compatible with Contax 645 mount digital backs. |
|
$369.99
|
|
 |
| Mfg #: Phase One |
| Description: Technicians upgrade the firmware, recalibrate and clean the IR filters and CCDs—or replace them completely if necessary. Shooting with Phase One's P-series comes extremely close to working with film. |
|
$12,990.00
|
|
 |
| Mfg #: Phase One |
| Description: Then visual and mechanical inspections ensure each refurbished back meets Phase One’s high standards for quality. The Phase One P-series is designed to match the requirements of professional users. |
|
$12,990.00
|
|
 |
| Mfg #: Phase One |
| Description: Technicians upgrade the firmware, recalibrate and clean the IR filters and CCDs—or replace them completely if necessary. Shooting with Phase One's P-series comes extremely close to working with film. |
|
$14,990.00
|
|
|
| Mfg #: Sinar |
| Description: Package includes: Adapter plate Masks CCD cover Screwdriver, screws, flash sync cable for Master Mode Camera control cable 2 for Slave Mode . |
|
$1,121.99
|
|
|
| Mfg #: Sinar |
| Description: Interface kit to allow use of Sinar eMotion 22 and 75 digital backs with the Contax 645 camera system. |
|
$1,822.99
|
|
|
| Mfg #: Sinar |
| Description: Package includes: Plate Screwdriver, screws, flash sync cable for Master Mode Masks CCD cover Camera control cable 2 for Slave Mode . |
|
$812.99
|
|
 |
| Mfg #: Beattie |
| Description: Small format cameras gain approximately 1 1/2 stops; medium format cameras 2 to 3 stops; and 4x5 and equivalent cameras 2 1/2 to 3 f/stops; and 8x10 cameras will gain 3 to 4 f/stops. |
|
$119.99
|
|
