| PRODUCT DETAILS |
 |
| Mfg #: Pelican |
| Description: Replacement o-ring for the Pelican 1750 case. Helps keep out dust, dirt, and water. |
|
$4.99
|
|
 |
| Mfg #: Kodak |
| Description: 0 white to 1. 90 black )printed with neutral inks on a plasticized substrate. The substrate for the grayscale and color patches is stable and neutral, and is flexible for mounting on a scanner drum. |
|
$39.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Matthews |
| Description: The bag's own weight actually increases its holding ability! Fast, easy-to-place and remove, Matthews' Boa Bag is a strong multiple-layered bag that's easy to lift and carry. |
|
$29.99
|
|
 |
| Mfg #: Calumet |
| Description: Replace your original diced foam set with this set that offers unlimited custom configurations to protect your equipment. |
|
$79.99
|
|
 |
| Mfg #: Kodak |
| Description: Makes 10 liters. |
|
$30.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.99
|
|
 |
| Mfg #: Clampette |
| Description: The 1/4-20 screw on the "Clampette" turns a table, ladder, even a board into a camera support, enabling you to take longer exposures. |
|
$9.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: After installed, dividers are 2" lower Allows 15" or smaller laptops to fit inside Allows the Cable Management 50 to fit inside . |
|
$39.99
|
|
 |
| Mfg #: Jobo |
| Description: It helps to keep algae in check, along with breaking up mineral deposits that can damage the mechanical parts of your processor. |
|
$64.99
|
|
 |
| Mfg #: Norman |
| Description: . |
|
$24.99
|
|
 |
| Mfg #: Calumet |
| Description: Machined from solid steel, this adapter fits into the stand base when the riser is removed. |
|
$15.99
|
|
 |
| Mfg #: Tamrac |
| Description: This large, zipper-closing, foam-padded lens case with an all-weather flap is designed for lenses up to 6. 75" long and with a filter size of 82mm. |
|
$16.99
|
|
 |
| Mfg #: Kodak |
| Description: Features: All are liquid concentrates for easy mixing and handling Available in a variety of sizes for the most economical and efficient use in your processing lab . |
|
$33.99
|
|
 |
| Mfg #: Rosco |
| Description: Rosco's premier range of filters, Roscolux, is manufactured in a unique technology to insure the longest possible life under hot theatrical lights. |
|
$7.99
|
|
 |
| Mfg #: Calumet |
| Description: Kit Includes: Black versions of the 20" double-riser grip stand, 20" extension arm and 2. 5" grip head This black three-section stand features a maximum extension of 51. 4 lbs. |
|
$129.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: 8 and similarly sized lenses, with the lens hood and tripod collar attached. Compatible With: Pro Speed Belt, Steroid Speed Belt, Rotation 360º, Speed Belt Packs or separately with a regular belt. |
|
$36.99
|
|
 |
| Mfg #: Kodak |
| Description: Liquid concentrate to make 10 liters. |
|
$7.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Photogenic |
| Description: The DR models offer digital displays for flash power or modeling power and precision adjustments in 1/10 or 1/2 f-stop increments. 2 amps idling, 15 amps charge Voltage Stabilization: Plus or minus 0. |
|
$89.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: Carry your super telephoto lenses such as the 300 2. Compatible With: Pro Speed Belt, Steroid Speed Belt, Rotation360º, Speed Belt Packs or separately with a regular belt. Internal Dimensions: 6. |
|
$45.99
|
|
 |
| Mfg #: Zylight |
| Description: The palm-sized Z90 can instantly change between fully calibrated Tungsten and Daylight white light with the push of a button. Color selection is fast and easy with the integrated digital display. |
|
$1,180.99
|
|
 |
| Mfg #: Rosco |
| Description: Converts 5500°K daylight to a nominal 2900°K. |
|
$133.99
|
|
 |
| Mfg #: Manfrotto |
| Description: This product is a Baby Plate with 5/8" Swivel Spigot. |
|
$34.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: Protect your back! Designed for comfort, this fully padded waist belt allows you to “Rotate or Lock” Modular, Skin, and Multimedia components for even weight distribution. |
|
$35.99
|
|
 |
| Mfg #: Smith Victor |
| Description: 10 inch general purpose reflector provides a even light pattern with either a 250 watt of 500 watt lamp. |
|
$36.99
|
|
|
| Mfg #: Rosco |
| Description: CalColor filters adjust the transmission of these color components at the individual light source so you can correctly predict how your film will render. |
|
$7.49
|
|
 |
| Mfg #: Manfrotto |
| Description: This snap in pin is specifically designed to connect Grid Head to Super Clamp. |
|
$4.99
|
|
 |
| Mfg #: Kodak |
| Description: This rapid-acting hardening fixer is for machine or manual processing. It is particularly recommended if prints tend to stick to belt or drum dryers or become softened in toning operations. |
|
$9.99
|
|
 |
| Mfg #: Buhl |
| Description: This unit features a 12" diffusion flood lens and weighs just 12 lbs. Includes barn doors, pictured. Stand adapter not included. |
|
$579.99
|
|
 |
| Mfg #: Rosco |
| Description: Rosco Cinegel 3801 Roscoflex M is a specular mirror surface for long throw reflectors or as a relay mirror to reflect the sun into a second reflector board. Tough, durable base. |
|
$7.49
|
|
 |
| Mfg #: Manfrotto |
| Description: Ten pound counter weight clamps on from: . 86" to 1. |
|
$41.99
|
|
 |
| Mfg #: Edwal |
| Description: 16 oz. liquid concentrate. Produces neutral (not bluish) black images and yields superior quality results with warm-tone fiber-base papers. |
|
$13.99
|
|
 |
| Mfg #: Arriflex |
| Description: ARRI lighting solutions is a specialist company providing turnkey solutions for production lighting and suspensions engineering in television and film studios. |
|
$21.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: RedWing |
| Description: Extension for Calumet Booms purchased between November 2000 and January 2008. |
|
$109.99
|
|
 |
| Mfg #: Ilford |
| Description: This toner provides a simple and effective approach for the user wishing to produce Selenium toned prints. It should be used at ambient room temperatures, nominally 20 degrees C/68 degrees F. |
|
$20.49
|
|
 |
| Mfg #: Kino Flo |
| Description: The Image 85 fixture produce a soft, shadowless display of daylight or tungsten quality light (CRI 95) that can be controlled without dramatic shifts in color. |
|
$2,349.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: This reversable stud inserts into the lightlift or extension tube and provides a 5/8" post to attach your light. |
|
$15.99
|
|
 |
| Mfg #: Zone VI Studios |
| Description: Authorities agree that a washing aid is required if archival results are to be acheived. |
|
$8.00
|
|
 |
| Mfg #: Lowel |
| Description: Converts 3200 degrees K to average daylight with light loss of approx. one stop. Absorbs some U. V. |
|
$89.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: Large soft boxes can move the balance point forward of the mounting point, causing the Lite Lift to bend and become difficult to operate. |
|
$109.99
|
|
 |
| Mfg #: Edwal |
| Description: 1 oz. liquid solution. Simply brush on color or black-and-white negatives to hide film base scratches when enlarging. |
|
$10.99
|
|
|
| Mfg #: Lowel |
| Description: This 1' 4-pin XLR cable adapts the updated Pro-light for use with appropriate 12 volt batteries for 100w operation. |
|
$21.99
|
|
 |
| Mfg #: Rosco |
| Description: The Rosco Cinegel offers a broad range of tools for controlling light. Cinegel 3028 Tough 1/4 White Diffusion (1/4 216) offers similar characteristics to Tough 1/2 White Diffusion, but less dense. |
|
$7.49
|
|
 |
| Mfg #: Lowel |
| Description: They are constructed with thick-wall, anodized gunmetal gray aluminum alloy tubing to deliver an exceptionally high strength to weight ratio. |
|
$124.99
|
|
 |
| Mfg #: Photographers' Formulary |
| Description: A two-stock solution that allows you to control the contrast of a print by varying the relative amounts of the two stock solutions that are combined and diluted to prepare the working solution. |
|
$16.99
|
|
 |
| Mfg #: Smith Victor |
| Description: Contemporary-styled, general purpose 600-watt quartz halogen light for photographic and video applications. Switch is unit-mounted and the 10' cord is 3-wire grounded. Includes 600 watt DYS/DYV lamp. |
|
$109.99
|
|
