| PRODUCT DETAILS |
 |
| Mfg #: Litepanels |
| Description: Fully flicker-free, this unit offers output that is 3 times more efficient than a conventional tungsten camera light! The compact Litepanels Mini fits easily on a camera, a stand, or elsewhere. |
|
$729.99
|
|
 |
| Mfg #: Manfrotto |
| Description: Normally used in combination with a D200 Grip head, it provides an extended grip point for scrims and flags. Pipe length 20". Supplied with T-Top. |
|
$32.99
|
|
 |
| Mfg #: Calumet |
| Description: Calumet hand-dyed muslin backgrounds are constructed from 100% cotton muslin. The muslins are sun dried, making them lightfast and will not fade over time. Note: This muslin is not flame retardant. |
|
$209.99
|
|
 |
| Mfg #: Kodak |
| Description: These filters can be used to make changes in the color balance of images recorded on color films. You can also use the mto compensate for deficiencies in the spectral quality of a light source. |
|
$65.99
|
|
 |
| Mfg #: Litepanels |
| Description: Fully flicker-free, this unit offers output that is 3 times more efficient than a conventional tungsten camera light! The compact Litepanels Mini fits easily on a camera, a stand, or elsewhere. |
|
$769.99
|
|
 |
| Mfg #: Manfrotto |
| Description: Set of four cable clamps for . 98" to 1. 1" diameter. |
|
$3.99
|
|
 |
| Mfg #: Manfrotto |
| Description: Black Autopole Extension tube, suitable for Autopole2 and Autopole. |
|
$39.99
|
|
 |
| Mfg #: Calumet |
| Description: Single-Coated Calumet filters will provide a higher level of defense against unwanted flare and contrast reduction than standard, uncoated filters. |
|
$69.99
|
|
 |
| Mfg #: Litepanels |
| Description: Fully flicker-free, this unit offers output that is 3 times more efficient than a conventional tungsten camera light! The compact Litepanels Mini fits easily on a camera, a stand, or elsewhere. |
|
$2,185.99
|
|
 |
| Mfg #: Manfrotto |
| Description: Mounts onto a standard 5/8" stand post and provides the longer 5/8 post required for Mole Richardson Lights. |
|
$11.99
|
|
 |
| Mfg #: Domke |
| Description: Domke Gripper Straps stay put with tracks of non-slip rubber woven into the cotton webbing. Swivel "QR" clips keep straps lying flat, untangled and easy to buckle / unbuckle. |
|
$15.99
|
|
 |
| Mfg #: Calumet |
| Description: 55mm 80A Multi-Coated Filter. |
|
$29.99
|
|
 |
| Mfg #: Litepanels |
| Description: The Micro harnesses the company's extremely efficient LED technology in an ultra-lightweight, extremely compact package. This kit includes the Micro light unit and the DV Adapter Plate for Sony. |
|
$344.99
|
|
 |
| Mfg #: Lowel |
| Description: 8 x 12" panel snaps onto Flexi-shaft. |
|
$29.99
|
|
 |
| Mfg #: Fiberbilt |
| Description: Partitions allow you to customize your Fiberbilt case to accommodate ever changing equipment needs. |
|
$6.99
|
|
 |
| Mfg #: Calumet |
| Description: 62mm #25 Red Multi-Coated Filter. |
|
$39.99
|
|
 |
| Mfg #: Rosco |
| Description: The Rosco Cinegel offers a broad range of tools for controlling light. Since its introduction in 1970, Cinegel has continually developed and grown to meet the working needs of the professional. |
|
$7.99
|
|
 |
| Mfg #: Calumet |
| Description: The length of the boom extends from 58" to 8 1/2' and a remote crank at the back of the arm controls the direction of the light source mounted at the other end up to 135 degrees. |
|
$249.99
|
|
 |
| Mfg #: Pelican |
| Description: Pick 'N' Pluck Foam can easily be shaped to protect your equipment. This set of three replacement foam inserts is designed for use with the Pelican 1450 case. |
|
$20.99
|
|
 |
| Mfg #: Calumet |
| Description: 72mm #11 Green Multi-Coated Filter. |
|
$49.99
|
|
 |
| Mfg #: Rosco |
| Description: Included are materials for diffusion, reflection, color effects and mixed-light color correction (strobes, tungsten, "hotlights," or cool white fluorescents). |
|
$32.99
|
|
 |
| Mfg #: Calumet |
| Description: This professional quality light stand offers maximum support with minimum bulk. It is made of attractive black aluminum, making it lightweight and easy to take on location. |
|
$24.99
|
|
 |
| Mfg #: Pelican |
| Description: Pick 'N' Pluck Foam can easily be shaped to protect your equipment. This set of four replacement foam inserts is designed for use with the Pelican 1510 case. |
|
$29.99
|
|
 |
| Mfg #: Calumet |
| Description: 77mm 81B Multi-Coated Filter. |
|
$59.99
|
|
 |
| Mfg #: Rosco |
| Description: The Rosco Cinegel offers a broad range of tools for controlling light. Cinegel 3314: Tough 1/4 Minusgreen Mired Shift N/A reduces the green output from fluorescents and other discharge sources. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: By using wood screws or bolts, this unit may be attached directly to the underside of a wood or steel structural beam. This piece could also be permanently welded into place on a steel beam. |
|
$12.99
|
|
 |
| Mfg #: Lightware |
| Description: Outside Dimensions: 7?(l) x 8(w) x 15(h)" (19 x 20 x 38cm) Inside Dimensions: 6(l) x 5?(w) x 11(h)" (15 x 14 x 28cm) Weighs: 2 lbs. (0. |
|
$154.99
|
|
 |
| Mfg #: Fujifilm |
| Description: With an RMS granularity of 7 Astia 100F gives you an unbeatable new freedom from grain and a new standard in color fidelity. |
|
$76.99
|
|
 |
| Mfg #: Rosco |
| Description: The Rosco Cinegel offers a broad range of tools for controlling light. Since its introduction in 1970, Cinegel has continually developed and grown to meet the working needs of the professional. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: Three individual hand cranks help lock the casters in place for added stability. The base is designed to accept the round Cambo Monopro column, available in 7' and 9' lengths. |
|
$759.99
|
|
 |
| Mfg #: Tamrac |
| Description: The ToolPak is designed to hold filters, batteries, pens, pencils, screwdrivers, a small notepad and most of the small accessories that are difficult to find when you need them. |
|
$29.99
|
|
 |
| Mfg #: Fujifilm |
| Description: Velvia 100 additionally provides a more useful ISO 100 speed, finer grain, improved neutral tones and better push/pull characteristics. |
|
$121.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Profoto |
| Description: Profoto offers a broad range of monolights, flash generators, continuous light and accessories for demanding photographers. Profoto products are fast, simple to use and reliable. |
|
$29.99
|
|
 |
| Mfg #: Lightware |
| Description: The Z cases protect any 300mm f/2. 0 lens, respectively. Outside Dimensions: 9(l) x 9(w) x 18?(h)" (23 x 23 x 47cm) Inside Dimensions: 7?(l) x 7?(w) x 15(h)" (18 x 18 x 38cm) Weighs: 3 lbs. |
|
$164.99
|
|
 |
| Mfg #: Kodak |
| Description: 0 white to 1. 90 black )printed with neutral inks on a plasticized substrate. The substrate for the grayscale and color patches is stable and neutral, and is flexible for mounting on a scanner drum. |
|
$48.99
|
|
 |
| Mfg #: Rosco |
| Description: The Rosco Cinegel offers a broad range of tools for controlling light. Cinegel 3001 Light Tough Rolux offers similar characteristics to Tough Tolux, but less dense. Tough, heat resistant base. |
|
$136.99
|
|
 |
| Mfg #: Cambo |
| Description: Item Specifications: Product Description: Cambo MBS-6 - stand adapter Type: Stand adapter Dimensions (WxDxH): 3. |
|
$349.99
|
|
 |
| Mfg #: Pelican |
| Description: Replacement o-ring for the Pelican 1120 case. Helps keep out dust, dirt, and water. |
|
$2.99
|
|
 |
| Mfg #: Kodak |
| Description: Liquid concentrate to make five gallons. |
|
$9.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.99
|
|
 |
| Mfg #: Calumet |
| Description: For Hi-Glide rails that run parallel to the supporting ceiling I-beam, a Back-to-Back Rail Clamp is required for each girder clamp. |
|
$36.99
|
|
 |
| Mfg #: Tamrac |
| Description: A fast-access, foam-padded pocket for flashes like Canon's 430EX or Nikon's SB-600 & SB-800 or light meters. Front pocket provides enough space for batteries or other flash accessories. |
|
$16.99
|
|
 |
| Mfg #: Kodak |
| Description: Liquid concentrate to make 10 liters. |
|
$22.99
|
|
 |
| Mfg #: Rosco |
| Description: The Rosco Cinegel offers a broad range of tools for controlling light. Since its introduction in 1970, Cinegel has continually developed and grown to meet the working needs of the professional. |
|
$7.99
|
|
 |
| Mfg #: Regal |
| Description: The Regalite Six camera support stand offers an exceptional value for the budget conscientious photographer who wants a sturdy yet lightweight stand having maximum mobility and portability. |
|
$549.99
|
|
 |
| Mfg #: Lowepro |
| Description: Modular elements let you build your own system to suit your ody type, your equipment and your shooting style — and you can change it for every shoot. |
|
$21.99
|
|
 |
| Mfg #: Kodak |
| Description: This developer has built-in protection from oxidation and evaporation that makes it particularly suitable for roller transport processors and processors with low utilization. |
|
$149.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Smith Victor |
| Description: Universal stand mount with 1/4x20 screw for your light. |
|
$5.99
|
|