| PRODUCT DETAILS |
 |
| Mfg #: Lightware |
| Description: Features side mesh pockets, a grab handle on top and a closure system that automatically pulls up an interior rain fly. |
|
$44.99
|
|
 |
| Mfg #: Kodak |
| Description: The new 100GX transparency film replaces E-100SW and features a very fine grain and warm color balance. These new films are great for amazing shadow detail, clean highlights and pure, bright whites. |
|
$95.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.99
|
|
 |
| Mfg #: Matthews |
| Description: One of the most popular grip accessories of all time has been incorporated into a 40” Gobo Arm. |
|
$74.99
|
|
 |
| Mfg #: Lightware |
| Description: The working pouch stores raw film while the three interior pockets hold small accessories. |
|
$28.99
|
|
 |
| Mfg #: Kodak |
| Description: The target is designed for use, in the commercial and desktop arenas, as a comparative control tool to help customers calibrate their input product to the final output. 7/1 (transmission) and IT8. |
|
$52.49
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: The frequent movement of the Lite Lifts may cause the fixing screws to work loose. A Safety Cable will prevent the device from falling should you not detect it in time. |
|
$13.99
|
|
 |
| Mfg #: Calumet |
| Description: Replace your original diced foam set with this new set that offers unlimited custom configurations to protect your equipment. |
|
$29.99
|
|
 |
| Mfg #: Kodak |
| Description: Through the years, Kodak has led the way with an abundance of new products and processes that have made photography simpler, more useful and more enjoyable. |
|
$42.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.99
|
|
 |
| Mfg #: Zylight |
| Description: Accepts Articulating Arm or Adjustable Clamp with the included 1/4-20 threaded adapter. Check valve allows repumping without loss of remaining vacuum. Lift tabs on pad edges permit instant release. |
|
$74.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: . |
|
$25.99
|
|
 |
| Mfg #: Kodak |
| Description: KODAK EKTACOLOR Chemicals are designed for processing all Kodak color negative papers. This section describes the chemicals, lists the available sizes, and tells you how to mix and store them. |
|
$14.99
|
|
 |
| Mfg #: Norman |
| Description: There are three high temperature filters in each set that can be added to the front of a reflector to cut light output without adjusting the power supply setting. |
|
$19.99
|
|
 |
| Mfg #: Matthews |
| Description: Used to stabilize stands, booms, and tripods. The Matthews 25 lb. (11kg) Cordura Sand Bag is essential whenever you need to stabilize stands, booms, and tripods. |
|
$36.99
|
|
 |
| Mfg #: Lowepro |
| Description: Modular elements let you build your own system to suit your ody type, your equipment and your shooting style — and you can change it for every shoot. |
|
$20.99
|
|
|
| Mfg #: Kodak |
| Description: Kodak's E-6 Final Rinse liquid concentrate makes one gallon. |
|
$3.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: This three-section stand features a maximum extension of 51. 75", a minimum height of 31" and weighs 10. 4 lbs. |
|
$89.99
|
|
 |
| Mfg #: Tamrac |
| Description: . |
|
$18.99
|
|
 |
| Mfg #: Kodak |
| Description: Features: All are liquid concentrates for easy mixing and handling Available in a variety of sizes for the most economical and efficient use in your processing lab . |
|
$22.49
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Cambo |
| Description: This rigid 24" arm accepts U9 or U29 platforms. Item Specifications: Product Description: Cambo U-45 - mounting bracket Type: Mounting bracket Recommended Use: Camera Length: 1. |
|
$529.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: Finally, one easy place to store your SLR flash with front pocket for batteries. Internal dimensions: 9” H x 4” W x 2. 75” D Weight: 4. |
|
$35.99
|
|
 |
| Mfg #: Bowens |
| Description: The Tri-Lite features a large handle for ease of use in repositioning your light and the highly efficient, flicker free lamps make each Trilite as bright as a 250W tungsten bulb. |
|
$264.99
|
|
 |
| Mfg #: Rosco |
| Description: Since its introduction in 1970, Cinegel has continually developed and grown to meet the working needs of the professional. Used when a very slight warming correction is desired. Deep-dyed base. |
|
$133.99
|
|
 |
| Mfg #: Manfrotto |
| Description: This double female thread stud plugs into Super Clamps 035 to provide either a 3/8" or 1/4" female thread fixing. |
|
$3.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: Two adjustment buckles are located on the front to move the bag up and down on the front of your body, which is essential during the day for relieving physical stress. |
|
$25.99
|
|
 |
| Mfg #: Rololight |
| Description: This 10' power cord is used to plug the Rololight Softbox into a standard 110 volt outlet. |
|
$37.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Manfrotto |
| Description: Stud is 5/8" long, with 3/8" male thread. |
|
$5.99
|
|
 |
| Mfg #: Kodak |
| Description: Kodak Dektol Developer For producing neutral and cold-tone images on cold-tone papers and warm tons with warm-tone papers. |
|
$5.99
|
|
 |
| Mfg #: Lowel |
| Description: Cut them out with ordinary scissors from the thick, black aluminum Blip sheet with designs printed on both sides. |
|
$18.49
|
|
|
| Mfg #: Rosco |
| Description: Cinegel #3805: Roscoflex G is a soft reflector combined with a warm gold tint. Useful for creating an early morning or late afternoon appearance. |
|
$7.49
|
|
 |
| Mfg #: Manfrotto |
| Description: Extending over 10 feet, this is the largest of Manfrotto's booms and features remote control of pan, tilt and rotation of laminar plus geared telescopic extension. |
|
$899.99
|
|
 |
| Mfg #: Kodak |
| Description: Kodak HC-110 Developer Concentrated liquid developer for rapid development of most black-and-white films. Particularly suited for scientific, technical, comercial, industrial and press photography. |
|
$13.49
|
|
 |
| Mfg #: Arriflex |
| Description: ARRI lighting solutions is a specialist company providing turnkey solutions for production lighting and suspensions engineering in television and film studios. |
|
$14.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: RedWing |
| Description: Extension for Calumet Booms purchased between November 2000 and January 2008. |
|
$79.99
|
|
 |
| Mfg #: Edwal |
| Description: Convenient liquid black and white paper developer concentrate produces densest blacks possible. Highly concentrated - one quart develops up to 250 - 8x10 prints. |
|
$19.99
|
|
 |
| Mfg #: Smith Victor |
| Description: Made in U. S. A. Cable: 10', 3-wire grounded Construction: Vented Steel Lamp Options: FDN, FCL, EMD, FCM, FHM, EME or EMF Mounting: Universal 3/8" to 5/8" Rating: 120-Volt-8. |
|
$169.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Matthews |
| Description: The head on these arms features two holes 3/8" and 5/8" eliminating confusion. The castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. |
|
$39.99
|
|
 |
| Mfg #: Kodak |
| Description: Kodak T-Max Developer A conventional or push-process developer for use with Kodak T-Max Professional, Tri-X Pan and Plus-X films in rolls. Ideal for small tanks and rotary tube processors. |
|
$11.49
|
|
 |
| Mfg #: Lowel |
| Description: Softens light, creates gentler, more flattering, but less dramatic, highlights and shadows. Light loss approx. |
|
$19.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: (4 to 5kg) of additional support to a lightlift. |
|
$54.99
|
|
 |
| Mfg #: Photographers' Formulary |
| Description: Fixes resin coated papers in 30 seconds and fiber based paper in 60 seconds. Can also be used with TMax films for 6 minutes to remove the magenta stain. |
|
$9.99
|
|
 |
| Mfg #: Lowel |
| Description: With its high intensity #2 Reflector and Prismatic Glass, the tiny focusable Pro-light is more efficient than a mini-fresnel of equal wattage. |
|
$7.49
|
|
