| PRODUCT DETAILS |
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: The frequent movement of the Lite Lifts may cause the fixing screws to work loose. A Safety Cable will prevent the device from falling should you not detect it in time. |
|
$13.99
|
|
 |
| Mfg #: Calumet |
| Description: Replace your original diced foam set with this new set that offers unlimited custom configurations to protect your equipment. |
|
$15.99
|
|
 |
| Mfg #: Kodak |
| Description: Makes five gallons. |
|
$9.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.99
|
|
 |
| Mfg #: Zylight |
| Description: Accepts Articulating Arm or Adjustable Clamp with the included 1/4-20 threaded adapter. Check valve allows repumping without loss of remaining vacuum. Lift tabs on pad edges permit instant release. |
|
$74.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: com/lostandfound. |
|
$25.99
|
|
 |
| Mfg #: Kodak |
| Description: This developer has built-in protection from oxidation and evaporation that makes it particularly suitable for roller transport processors and processors with low utilization. |
|
$59.99
|
|
 |
| Mfg #: Norman |
| Description: There are three high temperature filters in each set that can be added to the front of a reflector to cut light output without adjusting the power supply setting. |
|
$19.99
|
|
 |
| Mfg #: Matthews |
| Description: Used to stabilize stands, booms, and tripods. The Matthews 25 lb. (11kg) Cordura Sand Bag is essential whenever you need to stabilize stands, booms, and tripods. |
|
$36.99
|
|
 |
| Mfg #: Tamrac |
| Description: This water bottle in a foam padded carrier keeps your beverage within reach at all times. Foam padded carrier attaches to any belt or Modular Accessory System. Holds 20 oz. |
|
$18.99
|
|
 |
| Mfg #: Kodak |
| Description: Features: All are liquid concentrates for easy mixing and handling Available in a variety of sizes for the most economical and efficient use in your processing lab . |
|
$24.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: This three-section stand features a maximum extension of 51. 75", a minimum height of 31" and weighs 10. 4 lbs. |
|
$89.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: Side-zippered access and upside-down lens storage allows for the fastest retrieval possible for your 70-200 2. Compatible With: Pro Speed Belt, the Speed Belt Packs, or separately with a regular belt. |
|
$44.99
|
|
 |
| Mfg #: Tenba |
| Description: An internal framework of foam inserts has been custom fitted to hold the equipment more safely and securely than the original equipment shipping carton. |
|
$674.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Cambo |
| Description: This rigid 24" arm accepts U9 or U29 platforms. Item Specifications: Product Description: Cambo U-45 - mounting bracket Type: Mounting bracket Recommended Use: Camera Length: 1. |
|
$529.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: Quick access to your zoom lenses, such as the 24-70 2. 8, 28-135, and 28-200, with the lens hood attached. Compatible With: Pro Speed Belt, the Speed Belt Packs, or separately with a regular belt. |
|
$25.99
|
|
 |
| Mfg #: Zylight |
| Description: The Z50 ENG Kit includes everything you need to add intelligent LED lighting to your pro camera. The Z50's cutting-edge HD-led module is packed with over 230 LEDs packed in just a single square inch. |
|
$850.99
|
|
 |
| Mfg #: Rosco |
| Description: Since its introduction in 1970, Cinegel has continually developed and grown to meet the working needs of the professional. Used when a very slight warming correction is desired. Deep-dyed base. |
|
$133.99
|
|
 |
| Mfg #: Manfrotto |
| Description: This double female thread stud plugs into Super Clamps 035 to provide either a 3/8" or 1/4" female thread fixing. |
|
$3.99
|
|
 |
| Mfg #: Think Tank Photo |
| Description: Protect your back! Designed for comfort, this fully padded waist belt allows you to “Rotate or Lock” Modular, Skin, and Multimedia components for even weight distribution. |
|
$35.99
|
|
 |
| Mfg #: Lowel |
| Description: It provides increased versatility, especially in news and documentary use where lighting conditions may change quickly. 5 lbs (635 g) Max. Materials: Primarily aluminum and Ryton Cable: 4 foot (1. |
|
$269.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Manfrotto |
| Description: Stud is 5/8" long, with 3/8" male thread. |
|
$5.99
|
|
 |
| Mfg #: Kodak |
| Description: Kodak Fixer This general-purpose hardening fixer is for films, plates and papers. |
|
$5.69
|
|
 |
| Mfg #: Lowel |
| Description: Its diffusion screen measures a full 32" square, making it the softest Rifa available. The Rifa-lite creates a beautiful soft key or fill light and is compact, lightweight and self-contained. |
|
$609.99
|
|
|
| Mfg #: Rosco |
| Description: Cinegel #3805: Roscoflex G is a soft reflector combined with a warm gold tint. Useful for creating an early morning or late afternoon appearance. |
|
$7.49
|
|
 |
| Mfg #: Manfrotto |
| Description: Extending over 10 feet, this is the largest of Manfrotto's booms and features remote control of pan, tilt and rotation of laminar plus geared telescopic extension. |
|
$899.99
|
|
 |
| Mfg #: Acufine |
| Description: Handles virtually any combination of black-and-white films. |
|
$17.99
|
|
 |
| Mfg #: Lowel |
| Description: This 12V focusing light uses inexpensive 55w and 100w automobile halogen lamps and connects directly into an automobile cigarette lighter. The i-light accepts the same accessories as the Pro-light. |
|
$154.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: RedWing |
| Description: Extension for Calumet Booms purchased between November 2000 and January 2008. |
|
$79.99
|
|
 |
| Mfg #: Edwal |
| Description: FG7 is the ideal film developer for most darkroom situations. of FG7 can develop 2 rolls of film. With FG7, you have the option of many dilutions and methods of use for every continuous tone film. |
|
$16.99
|
|
|
| Mfg #: Lowel |
| Description: This cable adapts the updated Pro-light, with IEC connector, for use with many 30 volt batteries. |
|
$34.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Matthews |
| Description: The head on these arms features two holes 3/8" and 5/8" eliminating confusion. The castings offer positive lock in all directions. The strongest and most popular Grip Head in the industry. |
|
$39.99
|
|
 |
| Mfg #: Ilford |
| Description: Multigrade developer is clean working, has excellent keeping properties and gives a neutral image tone with most papers. |
|
$41.99
|
|
 |
| Mfg #: Lowel |
| Description: Lowel Clamps & Mounts extend the creative possibilities of any lighting kit. Well made and dependable, they increase your lighting options. |
|
$34.99
|
|
 |
| Mfg #: Rosco |
| Description: The heat and pressure of the extrusion process thoroughly combine the clear plastic and the dye resulting in a plastic that is body colored all the way through the film. |
|
$7.49
|
|
 |
| Mfg #: Calumet |
| Description: (4 to 5kg) of additional support to a lightlift. |
|
$59.95
|
|
 |
| Mfg #: Photographers' Formulary |
| Description: Photographers' Formulary specializes in photo grade chemistry for the amateur and professional photographer. |
|
$13.99
|
|
 |
| Mfg #: Lowel |
| Description: Its lights, controls, mounts and kits are designed and built for rugged dependable use, ease of operation & portability. |
|
$10.99
|
|
|
| Mfg #: Rosco |
| Description: Rosco Cinegel 3802 Roscoflex H matches the reflective characteristics of the traditional "hard" side of a reflector board. For long throw or situations requiring strongly directed light. |
|
$136.99
|
|
 |
| Mfg #: Lowel |
| Description: Sturdy and Lightweight, extends to 9'. Collar clamping; standard 5/8" (1. 59 cm) stud. Weight: 2. 6 lbs. (1. 2 kg) Size: (2. |
|
$94.99
|
|
 |
| Mfg #: Photographers' Formulary |
| Description: BW-2 allows you to have contrast control other developers do not give by using a different balance of the two solutions. |
|
$14.75
|
|
 |
| Mfg #: Lowel |
| Description: Accessories can be changed in holders. However, for fast or frequent changes, each should have its own holder. Up to three holders attach to the Pro and i-light Barndoor Frame, for use one-at-a-time. |
|
$12.49
|
|
|
| Mfg #: Rosco |
| Description: Rosco Cinegel 3102 Tough MT2 Filter - Amber. |
|
$7.49
|
|
 |
| Mfg #: Lowel |
| Description: Lowel Weight is a modular counterweight. A 5/8" (1. 59 cm) stud locks on female end of Lowel poles to counterbalance booms; two or three weights fit together for additional weight. |
|
$48.99
|
|
