| PRODUCT DETAILS |
 |
| Mfg #: Chimera |
| Description: These grids hook & loop to all four sides of the CHIMERA Lightbank's front recess area to provide a controlled beam spread. CHIMERA Soft Fabric Egg Crate Grid designations are 20°, 40°, and 60°. |
|
$364.99
|
|
 |
| Mfg #: Horseman |
| Description: When attached on a SW617 where the roll film holder is normally mounted, this removable screen can be used for critical focus and composition. |
|
$364.99
|
|
 |
| Mfg #: Tamrac |
| Description: The lower compartment holds items like flashes, a digital camera, extra film or even another camera body while the upper compartment can hold two large SLRs lying face down. |
|
$364.99
|
|
 |
| Mfg #: Sinar |
| Description: Sinar 222002 Cable Release. |
|
$360.99
|
|
 |
| Mfg #: Jobo |
| Description: The JOBO Lift Accessory is an item you can add to your CPA-2, or CPP-2 processors. The Lift accessory makes it easier to dump and fill the chemical and rinse steps. |
|
$359.99
|
|
 |
| Mfg #: Tamrac |
| Description: Carry both 35mm and medium format camera systems without sacrificing convenience andquick access. Accommodates strobes and telel lenses up to 17" (43cm) long. |
|
$359.99
|
|
 |
| Mfg #: Jobo |
| Description: The JOBO Lift Accessory is an item you can add to your CPE-2 Plus processor. It allows you to dump and fill the chemicals easier than doing it by hand. |
|
$359.99
|
|
 |
| Mfg #: Plume |
| Description: A Wafer Rectangle is a 3:4 proportioned diffusion bank for general use. This standard broad "window" is a classic portrait and product light used just off-camera or overhead on a boom. |
|
$359.99
|
|
 |
| Mfg #: Lightware |
| Description: All encapsulated in an exterior shell of puncture and abrasion resistant "ballistics material". You can also pack a compartment with a head pouch containing two or three additional lenses. |
|
$359.99
|
|
 |
| Mfg #: Schneider |
| Description: These filters have an absorption that diminishes gradually from the center to the edges where it reaches full transparency. |
|
$359.99
|
|
 |
| Mfg #: Rotatrim |
| Description: Four nylon bearings in the head further assure quiet, effortless cutting. Extruded aluminum squaring arm incorporates a combination inch/metric measuring scale and accepts the included Side Guide. |
|
$359.99
|
|
 |
| Mfg #: Manfrotto |
| Description: This kit is contains the Manfrotto 701HDV Pro Fluid Video Mini Head and the Manfrotto 745XBK MDEVE Black Tripod without C. C. The Manfrotto 745XBK MDEVE Black Tripod without C. |
|
$359.99
|
|
 |
| Mfg #: Steadicam |
| Description: The Steadicam Backpack fits the Archer, Archer SE, Clipper2, and Clipper 24 making it easy to carry your Steadicam to any location. |
|
$359.99
|
|
|
| Mfg #: Tamrac |
| Description: Carry both 35mm and medium format camera systems without sacrificing convenience andquick access. Accommodates strobes and telel lenses up to 17" (43cm) long. |
|
$359.99
|
|
 |
| Mfg #: Calumet |
| Description: This portable, lightweight, focusing quartz-halogen lighting unit is ideal for a wide range of video and photographic applications. |
|
$359.99
|
|
|
| Mfg #: Nikon |
| Description: The Nikon CT-404 is a replacement carrying case for the AF-S NIKKOR 400mm f/2. 8G ED VR Lens. |
|
$359.99
|
|
|
| Mfg #: Toyo |
| Description: Item Specifications: Product Description: Toyo reducing adapter (4x5") Accessory Type: Reducing adapter (4x5") . |
|
$359.99
|
|
|
| Mfg #: Nikon |
| Description: The Nikon CT-504 is a replacement carrying case for the AF-S NIKKOR 500mm f/4G ED VR Lens. |
|
$359.99
|
|
 |
| Mfg #: Profoto |
| Description: When used as traditional softboxes, the light produced is extremely even and homogeneous, with clean highlights, saturated colours, and really delicate shadows. |
|
$359.99
|
|
 |
| Mfg #: Calumet |
| Description: (9. 9kg). Additional springs can be added to increase the capacity to 44 lbs. (19. 9kg). The minimum extension for this piece is 13 1/4" (34cm), maximum extension is 72" (183cm). |
|
$359.99
|
|
 |
| Mfg #: Hasselblad |
| Description: All current Hasselblad reflex cameras are supplied with the Acute Matte D focusing screen. Using a meter prism viewfinder makes TTL exposure metering possible with the 903SWC ArcBody and FlexBody. |
|
$359.99
|
|
 |
| Mfg #: Elinchrom |
| Description: A focusing spot light designed for projecting shapes and cut-outs. Fits directly onto any Compact, S, or A head to produce a hard-edged, even circle of light. |
|
$359.99
|
|
 |
| Mfg #: Arriflex |
| Description: ARRI lighting solutions is a specialist company providing turnkey solutions for production lighting and suspensions engineering in television and film studios. |
|
$359.99
|
|
|
| Mfg #: Epson |
| Description: Adhesive Synthetic Paper is an ideal choice for signage that requires adhesive backing. Best of all, its adhesive backing makes it possible to remove and reposition signage for easy mounting. |
|
$356.99
|
|
 |
| Mfg #: Induro |
| Description: CX-Series tripods are made of the latest generation of high quality 8-layer carbon fiber tubing which is 60% stronger overall than conventional carbon fiber material. 2" folded and extends to 58. |
|
$355.99
|
|
 |
| Mfg #: Schneider |
| Description: The six-element, four group design reproduces the finest details with a fair balance of contrast and sharpness. The COMPONON-S is the first choice when image quality can not be compromised. |
|
$354.99
|
|
|
| Mfg #: Magiclée |
| Description: Magiclée FAB-6 is a 6. 8 mil, 100% polyester woven fabric ideal for producing flags, displays, window decorations, popup displays, and window backlits. |
|
$354.99
|
|
 |
| Mfg #: Elinchrom |
| Description: Puts total power adjustments, individual lamp head power, charge speed, audible signal, modeling lamp and open flash controls at your fingertips. |
|
$354.99
|
|
 |
| Mfg #: Magiclée |
| Description: 7 mil polyester film compatible with Epson and Canon printers. When combined with pigment inks, the Novara backlit waterfast coating makes it ideal for outdoor signage with or without back lighting. |
|
$353.99
|
|
 |
| Mfg #: Manfrotto |
| Description: For enhanced ease of use, the tilt lock and friction controls are located on the left side of the head. In addition to the old 503, the 503HDV has also a replaceable pan bar rosette. |
|
$353.99
|
|
 |
| Mfg #: Matthews |
| Description: With 60" (152cm) footprint. Adjusts from 64 to 167 1/2" (163 to 425cm), holds up to 88 lbs. (40kg) and weighs 35. 5 lbs. |
|
$349.99
|
|
 |
| Mfg #: Manfrotto |
| Description: Then to fold it back up again, just press the mechanism release button and push the leg closed. 4 inches Maximum Height: 51. 2 inches Leg Sections: 3 Foot Type: Rubber Maximum Load Capacity: 17. |
|
$349.99
|
|
 |
| Mfg #: PortaBrace |
| Description: The top loading case has a wide open fold back top that stays neatly out of the way. It's lightweight with a rigid frame and saves valuable storage space. |
|
$349.99
|
|
 |
| Mfg #: Lowel |
| Description: Item Specifications: Product Description: Lowel Basic Boom - boom stand Type: Boom stand Recommended Use: Lighting system Maximum Height: 107. 9 in Footprint Diameter: 39. |
|
$349.99
|
|
 |
| Mfg #: Nikon |
| Description: High Speed battery Pack for Nikon F6. Enables up to 8 fps second frame advance. Separate Shutter button, Multi-selector, Command and Sub-Command dial, AF-On buttons for vertical shooting. |
|
$349.99
|
|
 |
| Mfg #: Calumet |
| Description: Included in Kit: Supersoft Diffuser Sunlite 40 Reflector The Sunlite 40 Reflector is a 17", white-painted reflector that creates an even sunlight effect over a 40° angle of coverage. |
|
$349.99
|
|
 |
| Mfg #: PortaBrace |
| Description: Colored tabs on pocket flaps help identify contents for convenience. Slip pockets are provided for white balance card and identification. Two exterior mesh pockets hold tickets, maps and passport. |
|
$349.99
|
|
 |
| Mfg #: Panasonic |
| Description: This Thermodyne hard case is designed for the Panasonic HVX-200 camcorder and includes a built-in handle and wheels. |
|
$349.99
|
|
|
| Mfg #: Azden |
| Description: The 105 series sysetem features include 91 user-selectable UHF frequencies (566. 75 MHz), a pivoting high gain antenna, headphone output with volume control and a power-on/receiving signal LED. |
|
$349.99
|
|
 |
| Mfg #: Tiffen |
| Description: The Green 58 is a dark green filter that produces very light foliage. |
|
$349.99
|
|
 |
| Mfg #: Sony |
| Description: Perfect for television applications, Sony's ECM77B Omni-Directional Electret Condenser Microphone is a miniature lavalier microphone designed to be inconspicuous. |
|
$349.99
|
|
 |
| Mfg #: Calumet |
| Description: Studio shooters will appreciate the ease of light-angle control offered by this heavy-duty, telescopic boom and heavy-duty, two-section Cine Stand with casters. 5/8" stud included 15 lb. |
|
$349.99
|
|
 |
| Mfg #: Cambo |
| Description: This ball head with mounting plate is 8" tall, weighs 1. 3 lbs. , supports weights to 15 lbs. and is compatibile with the 35mm, medium and 4x5 formats. 3 lbs. (600g) Support Weight: 15 lbs. (6. |
|
$349.99
|
|
|
| Mfg #: Cambo |
| Description: Its quick-release mounting plate system makes attaching your camera to the head easy and safe. and measuring only 3 x 4 3/4". CBH-5 Ball Head features: Height: 8" (210mm) Weight: 1. (6. |
|
$349.99
|
|
 |
| Mfg #: Speedotron |
| Description: Speedotron's "standard" 2400w/s head is fan-cooled and designed for heavy-duty daily use. It fits all Black Line power supplies and accepts all universal reflectors and accessories. |
|
$349.99
|
|
 |
| Mfg #: K-Tek |
| Description: The system consists of an injection molded polypropylene microphone cage, 2 rubber retaining rings with removable sonic foam end caps, XLR pig tail, and a snug-fitting faux fur high-wind cover. |
|
$349.99
|
|
 |
| Mfg #: Elinchrom |
| Description: The set includes one Transmitter, two Transceiver RX, one USB Transceiver RX and EL-Skyport Software 2. The USB Transceiver RX module allows you to control your Elinchrom RX flash units by computer. |
|
$349.99
|
|
|
| Mfg #: Manfrotto |
| Description: 6' Black Super Boom Arm. |
|
$349.99
|
|
 |
| Mfg #: PortaBrace |
| Description: Comfortable foam padded shoulder straps allow you to backpack equipment leaving your "hands free". Adjustable dividers help form compartments to neatly protect portable light heads. |
|
$349.99
|
|
 |
| Mfg #: Beseler |
| Description: All metal, 3 lens turret directly accepts most lenses with a 39mm mounting thread. Longer focal length lenses and larger mounting threads require an adapter in order to mount. |
|
$349.99
|
|
