| PRODUCT DETAILS |
 |
| Mfg #: Calumet |
| Description: This washer features cross-fire water jets that keep prints suspended in turbulent, fresh water for a uniform wash on both sides. A bottom draining system removes water and high-density hypo. |
|
$569.99
|
|
 |
| Mfg #: Remin |
| Description: Remin Kart-A-Bag Kartmaster HD500 Hand Truck - 600 lb Capacity - Aluminum, Steel - 18" x 12" x 49" - Black. |
|
$569.99
|
|
 |
| Mfg #: Mamiya |
| Description: Accepts Power Connector for auto-cocking of N/L series Leaf Shutter Lenses. Item Specifications: Product Description: Mamiya Power Drive Grip 2 - battery grip Accessory Type: Battery grip Weight: 10. |
|
$569.99
|
|
 |
| Mfg #: Cambo |
| Description: Required adapter for using Bronica ERTSi with the 4x5 Cambo Sliding Back. Adapts to MegaVision's S2 or S3 Single Shot Digital Backs and many popular roll film backs. |
|
$569.99
|
|
 |
| Mfg #: Gepe |
| Description: Mounts up to 400 slides per hour. Accepts Gepe 2 x 2" (50 x 50mm) glassless, glass and pin registered mounts. |
|
$569.99
|
|
 |
| Mfg #: Cambo |
| Description: Soft case for use with Cambo V-40 boom and 1-meter extensions. |
|
$569.99
|
|
 |
| Mfg #: Omega |
| Description: Optional Solid State Voltage Stabilizer (OA5022) regulates line voltage for consistent light output. Built-in infrared heat absorbing filter yields purer color rendition and better color saturation. |
|
$568.99
|
|
 |
| Mfg #: Westcott |
| Description: Includes five fabrics, five frames, two dots, two fingers and one storage bag. |
|
$567.99
|
|
 |
| Mfg #: Tenba |
| Description: Air Cases feature Tenba’s exclusive design and construction – including a patented internal framework – that offers you the shippable protection of a hard case at a fraction of the weight. |
|
$566.99
|
|
|
| Mfg #: Seagull |
| Description: Oriental VC-FB Warmtone Paper (Roll) 42" x 100' (107cm x 30. |
|
$566.99
|
|
|
| Mfg #: Toyo |
| Description: Flexible and adjustable bellows type lens hoods for all lenses from 65mm up. Swing Up Mount allows easy access to lens controls. Use optional extension rods with 180-626 Pro Hood for large lenses. |
|
$564.99
|
|
 |
| Mfg #: Rotatrim |
| Description: Four nylon bearings in the head further assure quiet, effortless cutting. Extruded aluminum squaring arm incorporates a combination inch/metric measuring scale and accepts the included Side Guide. |
|
$559.99
|
|
 |
| Mfg #: Zone VI Studios |
| Description: Shorten your drying times with this powerful dryer! Dries fiber-based prints in 15-20 minutes and resin-coated prints in 5-10 minutes. |
|
$559.99
|
|
 |
| Mfg #: Bowens |
| Description: The basic rectangle design is a 3:4 proportional diffusion bank for general use. Includes support wands, front diffusion screen, two baffles, flameproof cowl and case. |
|
$559.99
|
|
|
| Mfg #: Canon |
| Description: Canon Lens Carrying Case 400. |
|
$559.99
|
|
|
| Mfg #: Canon |
| Description: Canon Lens Case 500. |
|
$559.99
|
|
 |
| Mfg #: Jobo |
| Description: They are not designed for traditional inversion (hand) processing because they would use too much chemistry if they weren't used horizontally . |
|
$555.99
|
|
 |
| Mfg #: Lawler |
| Description: The WRP-2 helps control hot / cold mix and regulates output temperature to a +/- . 5 degrees Fahrenheit, and features an accurate dial thermometer and thermostatic motor. Flow rate: 2 - 7 GPM. |
|
$555.99
|
|
 |
| Mfg #: Calumet |
| Description: The times are changing and our Travelites have changed to match them. The 375ws monolight has a Guide Number of 220. It recycles to full power in 1. and has a flash duration of 1/900 at full power. |
|
$554.99
|
|
 |
| Mfg #: Induro |
| Description: It's ideal for backpackers, nature, wildlife, landscape, photojournalist, travel and on-location photographers. Plus, this tripod includes both interchangeable rubber feet and stainless steel spikes. |
|
$553.99
|
|
 |
| Mfg #: GizMac |
| Description: 2 cm) wide rackmount cabinet space, the second generation XRackPro 4U is an ideal server rack and computer cabinet for Apple (Xserve server and Xserve RAID), Windows (Dell, HP, IBM, etc. |
|
$549.99
|
|
 |
| Mfg #: Plume |
| Description: Wafer Strips make excellent choices for long narrow reflective highlights, “edge” lighting in portraits and the even lighting of backgrounds. Requires mounting ring. |
|
$549.99
|
|
 |
| Mfg #: Photogenic |
| Description: The PowerLight PL2 series incorporates the most advanced electronic components providing you with superior lighting control, repeatability and optional wireless function controls. |
|
$549.99
|
|
 |
| Mfg #: E-Image |
| Description: It is made of high-quality aluminum alloy and is designed to be both lightweight and sturdy. Its 75mm bowl base makes it extremely versatile and allows it to adapt to different size fluid heads. |
|
$549.99
|
|
|
| Mfg #: Mamiya |
| Description: Mamiya Quadra 72 Sheet Film Holder. |
|
$549.99
|
|
 |
| Mfg #: Sony |
| Description: It's perfect for outside shooting in shade or sunlight and ideal for wide-angle shooting and interviews. HVL-LBPA Video Light 3200K filter kit Battery Adaptor Code Cable Length Approx. 3 4/5 ft. |
|
$549.99
|
|
|
| Mfg #: Toyo |
| Description: This Intermediate Standard Frame is used to connect two bellows in between the front and rear standard of a TOYO-VIEW camera. It has manual tilt/swing/shift/rise movements for bellows adjustment. |
|
$549.99
|
|
 |
| Mfg #: Chimera |
| Description: Use the Chimera lightweight lightbank to control lighting used on small sets. The Plus unit comes with three screens: full, half and quarter density. |
|
$549.99
|
|
 |
| Mfg #: Cambo |
| Description: Item Specifications: Product Description: Cambo C-11 - camera ground glass back (5x7"/13x18 cm) Accessory Type: Camera ground glass back (5x7"/13x18 cm) . |
|
$549.99
|
|
 |
| Mfg #: Chimera |
| Description: There are eight sizes of Chimera Super PRO Banks: five rectangular models with 3:4 front screen proportions, and three strip banks with 1:4 screens. |
|
$549.99
|
|
 |
| Mfg #: Cambo |
| Description: Item Specifications: Product Description: Cambo coupling standard Accessory Type: Coupling standard . |
|
$549.99
|
|
 |
| Mfg #: Toyo |
| Description: 100mm Extension Back attaches easily between camera body and back for stable added extension for close-up or telephoto applications. |
|
$549.99
|
|
|
| Mfg #: Nikon |
| Description: The HK-35 is a replacement lens hood for the AF-S Nikkor 600 f/4G ED VR Lens. |
|
$549.99
|
|
 |
| Mfg #: Adobe |
| Description: Upgrading to the latest version of Adobe Photoshop is easier than ever! This kit includes Photoshop CS3 and the CS4 Upgrade for Mac. |
|
$549.99
|
|
 |
| Mfg #: Manfrotto |
| Description: A boom and stand kit that includes the Superboom and the Heavy Duty 3071 Stand. 106" long, ø 35mm. Complete with pivoting clamp 123, counter weight 3112, cable clips and 3071 stand with casters. |
|
$549.99
|
|
 |
| Mfg #: Cambo |
| Description: The U-10 fits directly into the crossarm U-4 or UBA and has a platform with 2x 3/8" camera mount. The U-10 is ideal for extra support for a heavy large format camera. |
|
$549.99
|
|
 |
| Mfg #: Rodenstock |
| Description: 6 - 32 Format Size: 6x9cm Barrel Size: 39mm (Requires 39mm retaining ring)Removable Stops: Yes. |
|
$549.99
|
|
 |
| Mfg #: Azden |
| Description: The 105 series sysetem features include 91 user-selectable UHF frequencies (566. 75 MHz), a pivoting high gain antenna, headphone output with volume control and a power-on/receiving signal LED. |
|
$549.99
|
|
 |
| Mfg #: Mamiya |
| Description: Inserts can be pre-loaded with film, and ready for use in Magazines. It's the economical and efficient way to be prepared for long shooting sessions when fast film changes are required. |
|
$549.99
|
|
 |
| Mfg #: Cambo |
| Description: . |
|
$549.99
|
|
 |
| Mfg #: Manfrotto |
| Description: In addition to the old 503, the 503HDV has also a replaceable pan bar rosette. The 7500 is topped of with a 3/8" tripod-head mount that will accommodate a wide range of different tripod heads. |
|
$549.99
|
|
 |
| Mfg #: Cambo |
| Description: The DCS Pro SLR/C functions as the capture device and the Ultima 35 system (sold separately) is hardware that swings, tilts and shifts, both laterally and vertically, for critical focusing. |
|
$549.99
|
|
 |
| Mfg #: Lowel |
| Description: Rifa 66 is the second largest of the Lowel Rifa family. Its diffusion screen measures 25" square, making its output very soft. Collapsed length: 24". Front: 21 x 21", 75° beam angle. |
|
$549.99
|
|
 |
| Mfg #: Profoto |
| Description: The Pro 7b generator gives you all the advantages of a heavy duty Profoto studio generator in a portable powerhouse. 5 hours. Partial charging is also possible, as batteries do not have a memory. |
|
$549.99
|
|
|
| Mfg #: Regal |
| Description: The Regalite Six camera support stand offers an exceptional value for the budget conscientious photographer who wants a sturdy yet lightweight stand having maximum mobility and portability. |
|
$549.99
|
|
|
| Mfg #: Sinar |
| Description: Package includes: Adapter plate Masks Camera control cable for slave mode Screwdriver & screws . |
|
$549.99
|
|
 |
| Mfg #: Cambo |
| Description: . |
|
$549.99
|
|
 |
| Mfg #: HP |
| Description: For use with the Hewlett-Packard Z2100 printer. |
|
$549.99
|
|
 |
| Mfg #: Tenba |
| Description: Includes built-in wheels and a sturdy, retractable handle. |
|
$547.99
|
|
|
| Mfg #: Arriflex |
| Description: 75" Height x 15" Width x 16" Depth - Plastic. |
|
$546.99
|
|
